Marble floor and stair designs
Marble in regular supply, bought as block and slab and sawn, finished and edged to size at our Karachi works, for floors, stairs and inlays. These are the 5 marbles with a page of their own, set out by the room they suit. Samples are sent on request.
The full list of marbles we supply, with finishes and edge profiles, is on the marble slabs and tiles page.
Marble floor designs
One floor, five different characters. Each marble below links to its own page for the full description, finishes and edge profiles.

Ziarat White marble
Ground: Cool near white
Entrance floors, circulation areas and stair treads where a pale ground should carry daylight into the room.
No photograph of this marble is on the site yet. A sample is sent on request.
Afghan White marble
Ground: Warm milky white
Internal floors and stair treads that want a warm white without a strong directional figure.

Verona Beige marble
Ground: Warm beige
Floors and stairs laid to a drawing, where warm directional veining is the point of the room.

Botticino Cream marble
Ground: Even cream
Large internal floors, entrance halls and stair treads where the stone should stay quiet.
No photograph of this marble is on the site yet. A sample is sent on request.
Ocean Brown marble
Ground: Mid brown
Floors, stairs and wall modules where long cream veins should read as a current; the direction is set on the drawing.
Marble stair designs
A stair is the part of a marble floor that is walked on hardest and looked at closest. Three decisions settle most of it.
1
Treads and risers in one stone, or two
Cutting stair treads and risers is part of the work done at the Karachi works, and tile is the usual format for both. Cut from one selected lot, treads and risers keep the same ground tone and the stair reads as one piece. Two contrasting stones, a pale tread over a darker riser, draw the steps as separate lines.
2
A honed finish on the tread
Polishing is the most slippery of the three finishes when wet. A honed face is matte and holds better underfoot, and it hides fine wear because there is no gloss to interrupt. For an outdoor or wet step, use a brushed or textured finish rather than a polished one, and approve it on the selected lot.
3
Choose the stone for how it wears
Ziarat White, Afghan White and Botticino Cream are described on their pages as suited to stair treads, and Verona Beige and Ocean Brown name stairs as a tile use. Botticino Cream is the quietest, with a low contrast ground. Verona Beige and Ocean Brown are directional, so the vein direction should be set on the drawing before the treads are cut.
Marble inlay designs
Inlay work is cut at the Karachi works. We do not publish inlay examples yet, because each one is drawn for the room. Send a drawing or a sketch of the pattern and where it sits, with the marbles you have in mind, and we will tell you what can be cut.
Four things that decide a marble floor
Everything on this page is a choice between a ground, a vein and a finish.
1
Start from the ground
Ziarat White is a cool near white with fine grey veins. Afghan White is warmer and milkier with soft grey clouding. Botticino Cream and Verona Beige are the cream and beige grounds, and Ocean Brown is the mid brown. The ground is most of what a room reads as, so choose it first.
2
Decide how much the stone should move
Botticino Cream is the quiet one: even, low contrast, with short broken veins. Verona Beige and Ocean Brown run in one direction across the face, which is the reason to choose them and the reason the setting out has to be decided before cutting.
3
Judge the lot, in your own room
A generic photograph of a variety does not describe the lot being offered. Ask for photographs of the open slabs, approve the lot, and look at the sample in the room it is for, at the hours the room is used.
4
Order the whole area in one lot
A block is finite, so a later delivery will not match the first. Order the full area together, add attic stock for repairs, and dry lay a run before anything is fixed.
Choosing marble for floors and stairs
Which marble suits stairs?
Ziarat White, Afghan White and Botticino Cream are described on their pages as suited to stair treads, and Verona Beige and Ocean Brown name stairs as a tile use. Choose a honed finish for an internal stair and a brushed or textured finish for an outdoor or wet step, and approve the finish on the selected lot.
Which marble is best for a house floor?
There is no single best, because it depends on the ground and the amount of movement you want. Pale floors are usually Ziarat White, Afghan White or Botticino Cream, and warmer, more active floors are Verona Beige or Ocean Brown. Honed is the usual starting point for a busy internal floor. Tell us the area and the room first.
Can the floor and the stairs be cut from the same marble?
Yes. Both can be cut from the same selected lot, so the floor and the stair keep the same ground tone. Order the whole area, stairs included, in one lot, because a later block will not repeat the first.
Can I see the marble before I order?
Yes. Samples are sent on request. Use the request link on any marble above, and ask for photographs of the open slabs of the lot being offered, since a sample shows the stone and the lot shows how much it varies.
Name the marble, then see it in your room
Send the marble, the area and where it is going, and we will send a sample.
